CNC71 BMW E46 Steering Angle Lock Kit – Basic

Description

CNC71 BMW E46 Steering Angle Lock Kit – Basic

The adapters are milled on CNC machines, which gives high quality finish, 100% adapter fit to the steering knuckle and pin ends. For E46 adapters are made of the hardest aluminum according to Polish standards. The wishbone is laser cut and has precisely machined holes for the pins and stabilizer mounting (we recommend its installation for better car handling in a skid, especially when the suspension is not very hardened).

To install the kit, you must move the upper shock absorber mount outwards yourself (camber, relocator or E46 M3 cushion – we recommend the latter as a simple and reliable option).

When installing the kit, there is no need to cut, weld or grind anything, everything is installed Plug&Play, the operation is fully reversible, the bodywork remains intact.

The new swingarm design (without self-modification) does not allow for mounting a stabilizer. No hole for the link.

The swingarm is 4 cm longer than the stock one, the adapter moves the wheel 2 cm away. A total of 6 cm on the extension side.

There is 62 degrees of turning possible.

The BMW E46 steering kit includes:

front wishbone LEFT – 1 piece
front wishbone RIGHT – 1 piece
front wishbone adapter LEFT – 1 piece
Front wishbone adapter RIGHT – 1 piece
mounting screws – 4 pieces
Assembly instructions are included with the kit.

Product intended for track use!